[Tutorial] Common Settings Tab in CHITUBOX YouTube

Transition Layer Count Chitubox Settings. [CHITUBOX Pro]Lesson 4 Setting and Help YouTube When printing in transition layers, the exposure time will decrease with the increase of printing layers Here we will show you a list of detailed explanations of all these options.

That is where the transition layers come into the picture Light PWM for normal layers, from 0 to 255, controls the power of the UV light source for normal layers

CHITUBOX Review and Guide Slicer Software for Resin 3D Printers

When printing in transition layers, the exposure time will decrease with the increase of printing layers: Transition Type Then exposure time for layer 7 to layer 12 will gradually decrease until it stops at the pre. Layer Height: 0.04 Bottom Layer Count: 4 Transition Layer Count: 0 Exposure Time: 2.8 Bottom Exposure Time: 12 Light Off Delay: 0 Bottom Light Off Delay: 0 Bottom Lift Distance: 7mm Lifting Distance: 7mm Bottom Lift Speed: 60 Lifting Speed: 60 Retract Speed: 180

ChiTuBox An Overview of the 3D Printing Resin Slicer FacFox 3D. This new feature in Chitubox helps the regular layers attach to the bottom layers. What happens is that if the difference between bottom layer exposure and regular layer exposure is too big.

[Tutorial] Common Settings Tab in CHITUBOX YouTube. when printing in transition layers, the exposure time will decrease with the increase of printing layers When printing in transition layers, the exposure time will decrease with the increase of printing layers: Transition Type: Set the transition type of the exposure time when transiting from the bottom layers to the normal layers